Trailer Hitch Installation - 2010 Mini Cooper Video

In regards to the Curt Trailer Hitch Receiver part #C11160 which is a fit for a 2011 Mini Cooper, the third brake light will need to be removed if present. The light can be kept for reuse if the hitch is removed and you can simply zip-tie the…

I have a solution for you, but the Curt #C11417 is not a confirmed fit on the 2017 Mini Cooper; it is designed for older models of the Mini Cooper only. The only available hitch confirmed to fit the 2017 Mini Cooper (excluding S and John Cooper…

I recommend the Thule Roof Rack System which consists of #TH711200 crossbars, #TH480R Feet, and custom fit kit #THKIT1366 for your 2005 Mini Cooper. The bars have a weight capacity of 165 lbs. However, this is only the limit of the bar and does not…

On a trailer tire labeled ST205/75D15 C, the ST stands for Special Trailer which means it is designed for use on boat and utility trailers. The 205 is the section width of the tire in millimeters. The 75 is the aspect ratio (or section height). It…

For your 2009 Mini Cooper Hardtop Base Model with Single Exhaust you would want the Curt Hitch part #C11160. You should note that this is a Class I hitch and that there are no Class III hitches available for your vehicle. I attached an install video…

When wiring in the Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red Item #RM-152-LED-7 you'll want to place the bulbs in the red portion of the tail lights. Without seeing your tail light assembly fully…

We actually have a decent amount of wiring kits that you can install on your 2006 Mini Cooper to flat tow it. If you plan on flat towing it frequently then installing a tail light wiring kit like the Roadmaster #RM-155 which uses a 4-Way to the…

As long as your 2014 Mini Cooper hardtop has a single exhaust and is not a S series or John Cooper Works, the Curt #C11417 will work great for you. Based on the photo you attached of your Mini Coooper, it looks like the hitch will work well for you.…

The sway control bracket you're looking for is #RP26003. This fits a 1 inch diameter hitch ball which you can use #C40007 for a 2-5/16 inch ball. I've linked a video of the bracket being installed.