Review of TorkLift Camper Tie-Downs - Sierra and Silverado Front Tie-Downs - TL44FR Video

For your 2021 Chevy Silverado 3500 dually, long bed we have the Torklift Tie Downs part #TL44FR and #TL84FR as a confirmed fit if you do not have factory step bars.

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

We have replacement legs for the HappiJack truck camper systems like the part #LC736515 which has 36-1/2 inches of lift and a 2,800 lb capacity as well as the #LC736514 which has 34-1/2 inches of lift and a 2,200 lb capacity but the legs themselves…

That shouldn't be a problem but what is the hitch size of your 2020 Silverado? It could be a 2 inch, 2-1/2 inch hitch, or even a 3 inch hitch. Measure the inside height and width and let me know.

While you are correct that the hitch you have on your 2015 GMC Sierra 1500 is one of the factors for finding the correct camper tie-downs, but most work with both factory hitches and non-torklift aftermarket hitches. You only need more specific…

For your 2020 Chevy Silverado 2500 with 6-3/4 foot bed, the front #TLC2225 and rear tie down #TLC3221 are the correct fit for your truck. Whether you have the double cab or the crew cab and whether you have running boards or not these are the…

I spoke to a representative from Torklift International and he said as long as your running boards do not extend beyond the cab you will not have any issues with camper tie downs. The camper tie-downs that fit your 2022 Chevrolet Silverado 3500 DRW…

The TorkLift Custom Frame-Mounted Camper Tie-Downs Front #TL44FR is the TorkLift part number C2226. The Rear #TL84FR is the TorkLift part number C3222. These are the correct parts for your 2023 Chevrolet Silverado 3500 Long Bed Dually with the…

I would agree with your assessment that the Superhitch Magnum 30k part #TLC1205-30 is overkill from a weight capacity point of view and the Original part #TLC1205 is more closely rated to what your vehicle is equipped for. Beyond that the Magnum has…

Since none of our extenders are a viable option (either too short or not rated high enough for weight), your best option would be to use a ball mount with a long shank. Part #325-GH-064 is rated for 21,000 lbs, fits a 2-1/2" hitch receiver, and…

The Gen-Y ball mount #325-GH-064 is 12-1/2 inches long from end to end. It's about 9-1/2 inches from the pin hole to the center of the larger of the two balls. This is longest ball mount for a 2-1/2 inch trailer hitch receiver and is rated for…

It sounds like you have a trailer hitch receiver already installed and need to add a second trailer hitch receiver for a double receiver to allow for the extension and tongue weight of your horse trailer. Because you don't have the factory hitch…