Review of Taylor Made Boat Accessories - Dock Float - 36946116 Video

Customers compare 36946116 to these similar products

Taylor Made Dock Float - 36" Long x 24" Wide x 16" Tall - Encased Foam

(4)

$234.11

Jif Marine Pontoon Storage Blocks - 17" Long x 17" Wide x 12-1/2" Tall - Qty 4

$195.57

Products Featured in this Video

Taylor Made Boat Accessories - Dock Float - 36946116 Review

Today we're going to take a look at the Taylor Made dock float. Now, this dock float will offer a dependable surface to either build a new dock system or replace flotation devices in an old system. It has a nice thick mounting flange around the whole edge that can accommodate attachment fasteners for any dock design. To install this, it does require 3/8" x 3" long lag screws for mounting, and they… see more >

Info for this part was:

Installed by:

Jeff D

Video Edited:

Chris R

Test Fit:

Shane H

Video by:

Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Explore Expert Info

Most Popular Wheel Bearings

Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)

5 Things to Know About Weight Distribution Hitches

Rooftop Cargo Carriers

How to Determine Number of Floats for Floating Dock and Where to Space Them

That really depends on how much the floating dock is going to weigh. Basically you need to determine the weight of the dock and then divide that by 600 lbs as that's how much weight the #36946117 supports. Then you'd want to evenly place the…

view full answer...

What is the Difference Between a Class II and a Class III Hitch?

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

What is the Difference Between a 4-Way and 7-Way Trailer Connector

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

7-Way Trailer Plug Adapter or Compatibility with Lance Slide-In Truck Bed Camper

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Best Way to Prevent Sagging Suspension When Towing a Trailer

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

How Often Does The TireMinder i10 TPMS #TM38FR Refresh The Pressure and Temperature?

The TireMinder i10 TPMS #TM38FR refreshes every 6 seconds. You will get a visual and audible alert when the monitor receives the signal from your tire sensor is either below your pressure or the temperature exceeds the maximum setting.

view full answer...

Differences in Color Between Ventline Replacement Roof Vent Screen in Polar White and Birch White

You are exactly correct. Birch white is more of a cream color, while polar white is a very bright white.

view full answer...

Installation of Redarc Tow Pro Brake Controller on 2021 Ford Ranger

Assuming your 2021 Ford Ranger is equipped with the factory 7-way trailer connector, the install of a #RED44FR Redarc Tow-Pro Elite would be identical to what's shown in the linked video. May I make a suggestion though? Unless you really need the…

view full answer...

RV Kitchen Faucets with a 1-1/4" Diameter 1-Hole Installation

I have listed out the options that we have for your 1-hole kitchen faucet with a 31.5mm (1-1/4") diameter hole below. - Empire Faucets RV Kitchen Faucet w/ Pull-Down Spout #EM42HR - Empire Faucets RV Kitchen Faucet w/ Pull-Down Spout #EM34JR -…

view full answer...

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...