Review of SAM Snow Plow Parts - Replace Cutting Center Piece Fisher EZ-V Western MVP - 3371312202 Video

You did indeed see a video showing how to replace the vent lid #BVD0449-A01. I have linked that video for you here as well. IT was one that I made a while back and that is probably where you saw it.

We have had a similar question to this come up and we were able to determine that the number AS-13 M-VDO449 that you listed is stamped on the vent cover part #BVD0449-A01. If you are looking for the entire fan setup and not just the cover you would…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Dometic 300 Toilet, #DOM64FR has a total length of 19-3/4" with a minimum distance from wall to center of 8-1/2". The Dometic 320, #DOM87FR is overall length of 22" with a minimum distance from wall to center of 11". If you…

Hey Sandra so we've actually checked with Dometic in the past about seeing if they have replacement foot pedals for the 310 and they do not have that as a replaceable part. Only solution would be to replace the toiled or modify what you have now…

To replace the controller for the Replacement Vacuum Generator for Dometic VacuFlush RV Toilet #DOM46FR you need the Replacement Touchpad for Dometic VacuFlush and MasterFlush RV Toilets #DOM36FR.

I agree, that note doesn't make sense. When I reached out to my contact at MORryde they said the MORryde RV Generator Slide Out Tray #MR79RR doesn't have a stopper for when the tray is in the fully opened position so you just need to make…

The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…

Provided that your existing brakes are 12-1/4" x 4" and use the same 7-bolt mounting pattern then you can use Dexter Electric Trailer Brake Kit #23-438-439. I have included a link to a video review of this kit for you.