Putco Off Road Lights - Light Bar - P10055 Review Video

I am sorry Beth, but we do not offer an equivalent to the AL-KO 5/8 hub assembly #568215. We do carry replacement bearings for this hub with the #TRJM511946 inner bearing and the #JM205149 outer bearing, but we do not offer any hubs that use this…

The B&W Continuum Weight Distribution System part #BW78FR requires at least 24" of space on the frame directly behind the coupler and along the side a few inches back from there. This works with most trailers but for some it will not and,…

The difference between the standard and underslung B&W Continuum Weight Distribution System is the coupler style they are designed for. If you have a standard coupler like the #CA-5400-B mounted to the top of your frame then you need the standard…

Great question. Suspension Enhancement Sytems (SES) are intended to assist suspension in good working condition, but will not correct any bowing in your axle or increase the towing capacity of your vehicle. Assuming your vehicle suspension is in good…

The Konig Tire Chains part #KON64FR are a really great snow chain option for your 2020 Ram 2500 with the tire size #LT285/60R20. What I really like about these chains is they provide excellent traction, install easily, and last a very time due to the…

You would need to have a reverse light circuit ran to your trailer to power reverse lights. If you have a 5-way flat or 7-way trailer connector currently then that circuit is already present. If you have a 4-way harness then you would need to install…

4-Way to 5-Way adapters #47515 and #20036 are essentially the same. The difference is that #20036 has longer wiring with it than #47515. For that reason we normally recommend #20036. The 4-Way to 5-Way portion is 18 inches long. The blue wire though…

Since you have a 7-way you have the reverse light circuit pin already present so you'd need just to wire from the center pin of the 7-way to reverse lights like the #BUL78CB.

Using the Mighty Cord Wishbone 4-Way Flat Trailer Connector - Trailer End - 25' #A10-4225VP will give you the wiring for the tail lights on each side of your trailer giving you both the running light for each side and then the stop/turn function…

I spoke to my contact at Custer and she stated that on double halogen spotlight #S742 the output is approximately 1,100 lumens per bulb for a total of about 2,200 lumens. Lumens is the same as candelas (candle power) at a distance of 1 foot in any…

While we do have great lights that are perfect for installing for visibility while backing up your trailer at night, we do not have a light that comes with a mounting pole for installation. With that being said, we do have a super bright solution…

These will certainly provide enough light. My concern would be that they provide too much light and would considered rear-facing headlights. There are DOT restrictions about how bright rear-ward facing lights can be so as drivers behind you are not…