Review of PTC Air Intake Filter - Custom Fit Engine Air Filter - PTC97FV Video

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

I reached out to Hydrastar and they are very familiar with disc brakes on your 2018 Grand Design Momentum toy hauler. They said Grand Design typically gets their axles with 9/16" studs of which we only have the Hydrastar Disc Brake Kit w/…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

The TST TPMS for RVs with 6 Flow Through Tire Sensors #TST-507-FT-6-C are compatible with steel, chrome, or nickel valve stems. Since you have rubber valve stems you need the kit #TST-507-RV-6-C with the standard sensors instead.

The newer factory brake controllers don't have many issue when used with electric over hydraulic brakes. The older models would not work at all. That said, in order to ensure better compatibility it would not be a bad idea at all to install an…

The standard torque on a Redline Trailer Wheel Lug Nut - 9/16 inch, part #6-53, is 135 to 145 ft lbs. This is the torque range that is normally used. If the instructions for the wheel are saying 110 ft lbs there might be a reason, like the wheel…