Review of GSI Outdoors Camping Table - Macro Compact Adjustable Table - 37355310 Video

If you are unsure if you have the tow package or not, the only way to find out for sure would be to contact a dealership with your VIN. With certain vehicles we can sometimes check to see if certain electrical components are present, like a 7-way…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Replacement Printed Circuit Board and Switch for MaxxFan Roof Vents #MA10-04301K-V16 is the upgraded circuit board from what you sent in a picture of (4201). This will still work for you and will give you a more reliable board.

Although using a hitch extender isn't an ideal solution for most people I think one would work well for you. Especially if you use an anti-rattle device like the part #63232 to minimize movement. You shouldn't need a very long extender. The…

Yes, the Automatic Changeover RV LP Gas Regulator #37207-30395 will work to replace your Winntec 6020. This regulator uses the same sized fittings as your 6020 and the BTU rating of this is compatible.

We've actually had this one asked before and have consulted with MaxxAir. Even though you can technically install the MaxxFan Deluxe Roof Vent #MA00-06401K wired to a separate switch, it is not recommended. The reason for this is that their fans…

We have a folding table that our customers have mounted to the outside of an enclosed trailer. Check out the Tow-Rax folding table, #TWSP45HFTA. This table is 45-1/2" Long x 18-1/2" Wide and when folded would only add about 3 inches of…

I spoke with my contact at MaxxAir regarding the MaxxFan Deluxe Roof Vent #MA00-06401K. He said that while it technically can be done, they do not recommend wiring any of their fans to a separate switch. The reason for this is that their fans are…