Camco RV Sewer - Toilets and Parts - CAM41535 Review Video

You can tell your "friend" that they can confidently use the 2.6 Gallon Camco Travel Toilet #CAM41535 without worrying if it will be malodorous. The gate valve is sealed to lock in the unpleasantness, and so long as you - I'm sorry,…

If you were to clean it out daily there really isn't a need to add any chemicals to the Camco Travel Toilet part #CAM41535. The tank also seals really well to eliminate any remaining odors.

The Camco Travel Toilet #CAM41535 will have a couple of features to assist with the disposal of your deposit. It is basically a holding tank just like an RV sewer tank, so there is a limit to what it can do. This toilet has a valve to allow you to…

The Camco Travel Toilet has a stable base just over 15 by 17 inches and won't tip with a height of 12-1/2 inches. The really nice feature is the close valve to not only add that security but also add another barrier for smell. This toilet is also…

The Camco Travel Toilet, part #CAM41535, has a 2.6 gallon holding tank that is removable from the rest of the toilet. It can be emptied into any appropriate location, such as a regular toilet.

For a replacement combination LP Gas/CO detector for your RV you can use Atwood part #AT36681. It is intended for installation at no more than 18" from the floor and both include a mounting plate.

Yes, the 2-Wire RV Propane Gas and Carbon Monoxide Detector, #RS54FR has two different mounting brackets to select from allowing coverage of the existing hole from previous installs. Please note the attached product review video.

If by American toilet you are asking if the 2.6 Gallon Camco Travel Toilet #CAM41535 was made in the USA, then yes, it is an American toilet. I've added a link to a video review of this product for you to take a look at as well.

The Camco Travel Toilet, part #CAM41535, isn't designed to have a bag put inside it. It would be pretty hard to get one in the tank and in position to be useful. The holding tank does have a slick interior surface to make the clean up easier.

The Lippert Components Baggage Door Turn Latch #LC213117 is a steel with a chrome finish, but it isn't stainless steel. The width of the cylinder is about 0.88". I confirmed all of this info with my contact at Lippert.

Yes, we sure do! For a stainless steel 1-3/8 inch long thumb turn cam latch cylinder use #295-000013.

Definitely! The distance between the tangs on the Gen-Y Clevis #325-GH-039 is exactly 1.95" when measured with calipers. I went ahead and attached a diagram of this measurement for your convenience. For a hitch pin to secure the clevis to your…