Can a Class II Ball Mount be Used in the Draw-Tite Class I Hitch, Part # 24758
Question:
will the Hidden hitch #90001 fit the Drawtite 24748 hitch. Different brands same 1 1/4, any conflict with the pin hole? Thanks.
asked by: Graham B
Expert Reply:
The Draw-Tite Class II ball mount will not work with the Draw-Tite Class I hitch, part # 24748. To prevent Class II accessories from being used in a Class I hitch, the receiver has a stop welded into it to prevent the ball mount from sliding in far enough for the hitch pin to be slid into place.
The only ball mount recommended for use with that hitch is the Class I ball mount, part # 3593. You must use the hitch manufacturer recommended ball mount on a Class I hitch otherwise it will void the hitch warranty.
Products Referenced in This Question
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Product Page this Question was Asked From
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Hitch that Fits 2018 Chevy Malibu
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Choosing the Right Curt Class II Euro Style Ball Mount to Tow a Trailer Level
- Q&A: Hitch Recommendation For A 2016 Ford Focus SE Hatchback
- Q&A: Recommended Hitch and Wiring Harness for a 2011 Cadillac DTS
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: How to Determine the Right Ball Size to Use to Tow a Boat Trailer
- Q&A: Stabilizer Strap and Ground Clearance for a 2012 Toyota Camry
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Article: Best Vehicles to Flat Tow Behind an RV