Recommended Weight Distribution With Sway Control on a 2013 Dodge Ram Pickup
Question:
I tow a 9k sawmill daily. 800lbs tongue weight. Most jobs are on rough terrain and require backing trailer into position and nearly jack knifing it to get situated. Will a WD hitch hinder maneuverability? Also, tongue is pole type. Will this reduce effectiveness of WD setup? Thank you.
asked by: Shawn G
Expert Reply:
Any weight distribution system you add to your 2013 Dodge Ram pickup will hinder your maneuverability when backing up your trailer into tight spots. You can make slight turns in reverse with a weight distribution system, but not sharp ones.
Since you have a pole tongue, you will need a pole tongue adapter # RP58393. This Reese pole adapter will provide an attachment point for the spring bars by mounting a weight-distribution system the trailer.
I recommend the Reese Steadi-Flex weight distribution part # RP66560. It has a gross towing weight of 12,000 pounds and tongue weight of 600 to 1,200 pounds. The trunnion spring bars of this system slide into the weight-distribution head for quick, easy installation. These bars offer superior flex, and a controlled ride for both your tow vehicle and your trailer. Prior to maneuvering your trailer into tight areas, you will detach the spring bars so they are not damaged.
I have included a few FAQ's and video review for you too.
Products Referenced in This Question
Reese Pole-Tongue Adapter for Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Adapters
- Pole Tongue Adapters
- Reese
more information >
Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 12K GTW, 1.2K TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Product Page this Question was Asked From
Reese Weight Distribution System w Shank - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Can You Convert to 2-1/2 Inch Shank From 2 Inch With Reese Weight Distribution Hitch
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Weight Distribution Recommendation for Trailer with 900 lbs Max Tongue Weight Rating
- Q&A: Correct Tire Pressure for ST235/80R16 Trailer Tires
- Q&A: What Is The Recommended Lug Nut Torque On 7,000lb Axles?
- Q&A: Installing Trailer Brake Controller on 2018 Ford Transit T250 with Factory 7-Way
- Q&A: Will B and W Continuum Weight Distribution Work Well with East To West 2900KBH
- Q&A: Strait-Line Weight Distribution for a 2015 Ram 1500 and 2012 Windjammer Travel Trailer
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)