Installation Instructions for Breakaway Kit Part # 50-85-313 and Trailer Wiring Junction Box # 38656
Question:
I purchased this breakaway kit and the Junction Box #38656. I have seen different people say that the wiring needs to be ran different ways. Can you show me how the wiring has to be ran, using the listed breakaway kit and junction box, in order for everything to work properly?
asked by: Chad
Expert Reply:
The wiring for the Tekonsha breakaway kit # 50-85-313 and trailer wiring junction box # 38656 is listed below. You can also view the picture to the right.
The breakaway kit will have 3 wires to hook up where as the breakaway switch will have 2 wires. Take either brake switch wire and connect to the blue wire from the battery box. The other switch wire is output to the trailer brakes. White is ground and black will connect to the 12 volt circuit from the 7-way connector.
The trailer wiring junction box # 38656 is an easy way to connect wires from the trailer connector to the trailer wiring. You will take the grey cable and peel it back a little bit as you will run the white cable to the ground in the junction box. Since you may have different color wiring see the diagram to the right and match wires by function. See diagram to the right.
I have included a FAQ link as well as a few installation videos.
Products Referenced in This Question
Product Page this Question was Asked From
Tekonsha Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Top Load
- Trailer Breakaway Kit
- Kit with Charger
- Top Load
- Single-axle
- Tandem-axle
- Triple-axle
- LED Tester
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Replacement Head Assembly for B&W Patriot 5th Wheel Trailer Hitch - 18,000 lbs
- Search Results: 1/2 x 20 lug nuts
- Video: Tekonsha Push-To-Test Trailer Breakaway Kit Installation
- Video: Tekonsha Trailer Breakaway Kit - Kit with Charger - 50-85-313 Review
- Search Results: safety chains
- Search Results: 6 lug spare tire holder
- Search Results: 6 lug wheels
- Shop: Tekonsha Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Top Load
- Shop: Vehicle Lights
- Shop: Trailer Hitch
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center
- Shop: Curt Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Side Load
- Shop: Straight Equalizer for 1-3/4" Wide Double-Eye Springs - 8" Long - 9/16" Center Hole
- Search Results: bulldog jack
- Search Results: trailer leaf spring suspension
- Search Results: trailer safety chains
- Shop: Square Pipe Mount Swivel Jack w Footplate - Weld On - Sidewind - 15-1/4" Travel - 3,000 lbs
- Shop: Lionshead Steel Modular Trailer Wheel - 15" x 6" - 6 on 5-1/2 - Silver
- Shop: Suspension Enhancement
- Shop: Trailer Wiring
- Q&A: Where Do Each of the Wires of the Tekonsha Breakaway System part # 50-85-313 Run
- Shop: Tire Chains
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Dexter Nev-R-Adjust Electric Trailer Brake Kit Installation
- Video: Firestone Coil-Rite Air Helper Springs Installation - 2012 Toyota 4Runner
- Article: Trailer Wiring Diagrams
- Shop: BOLT brand vehicle and hitch locks
- Video: Review of Taskmaster Trailer Tires and Wheels - Vesper 16" x 6" Black Steel Mod 8 - 6-1/2 - TA77RR
- Q&A: Is There Difference Between Trailer Breakaway Kits 50-85-313 and 50-85-315
- Q&A: Do Dexter Nev-R-Adjust Electric Trailer Brakes 23-468-469 Come With Drums