Will the Trailer Hub Assembly # 845475UC1 fit on the Spindle # TRU47FR
Question:
what spindle will fit hub kit 845475uc1 ? the 5x4 3/4 hub
asked by: George F
0
Expert Reply:
Yes, the Spindle # TRU47FR that you referenced is compatible with the Trailer Hub Assembly # 845475UC1 that you also referenced.
expert reply by:
Jameson C
0
Products Referenced in This Question
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Article: Trailer Wiring Diagrams
- Q&A: How to Choose Correct Axle Placement for Tandem 7K Axles with Slipper Leaf Springs
- Q&A: What Size Trailer Wheel/Tire has Bolt Pattern 5 on 4-3/4 inch Available
- Q&A: Replacement Hub for Utility Trailer with Dexter 8-256 Hub
- Q&A: Replacement Microwave for my High Pointe EC942K9E in Stainless
- Article: Most Popular Wheel Bearings
- Q&A: 15" Trailer Wheel With A 5 On 4-3/4 Bolt Pattern Availability
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Where to Position the Trailer Axle?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure for Trailer Hitch Drop
- Article: Printable Trailer Bolt Hole Pattern Template