Trimming Trunk Pan Cover of 2010 Mercedes-Benz M Class to Install Curt # 13342
Question:
Hello - Instructions refer to a black trunk pan cover under the trunk pan that must be removed for hitch install. do you have trimming instructions/diagram for re-install of the mud cover? thanks
asked by: BRJ
Expert Reply:
Curt provides trimming instructions for its Class III trailer hitch, part # 13342. I've provided you a photo and diagram showing where and how much needs to be trimmed.
You'll need to see your dealer for the trailer wiring harness, and for a ball mount, part # D-4 is recommended. For a 1-7/8 ball, use # 19260 or # 63845 for a 2 inch ball you''ll also need the Hitch Pin and Clip, # PC3.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacing a 7.00-16 LT Tire for a Trailer
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Is a Transmission Cooler Required to Tow with a 2010 Mercedes ML350
- Article: Transmission Cooler
- Q&A: Replacement For Dexter DX12.5 Brake Actuator on Boat Trailer
- Q&A: Troubleshooting 7-Way on Mercedes ML-350 Where Trailer Lights Dont Work
- Q&A: How Many Bolster And Swivel Brackets Are Needed For A Boat Trailer
- Article: Trailer Hitch Installation Tips
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Installation Instructions Link for Curt Trailer Hitch # 13342 for a 2009 Mercedes ML350
- Q&A: Trailer Hitch and Installer Recommendations for a 2011 Mercedes ML350
- Article: Roof Rack Information
- Article: Steel vs. Aluminum Ball Mounts