Trailer Hitch Fits for 2011 Toyota Camry LE
Question:
Does the 90152 36416 hitch fit a 2011 Camry LE, one exhaust 4 cylinder?
asked by: Helmer
Helpful Expert Reply:
The two 1-1/4-inch Class II trailer hitches you referenced, Hidden Hitch # 90152 (no longer available) and Draw-Tite # 36416, both will fit your 2011 Toyota Camry LE. I verified this with the manufacturer. A video and two helpful articles concerning hitch installation are linked for your reference.
If your intended use is towing, then I suggest the Hidden Hitch # 90152 since a ball mount, pin and clip are included with it. All you'd need to add is a hitch ball and wiring harness. For a 2-inch ball you can use # 19258; for a 1-7/8-inch ball use # 19256. For wiring use # 118482 from TowReady.
If your application is a hitch-mount bike or cargo carrier, then I suggest Draw-Tite hitch # 36416 since you will not need the ball mount. With either of these hitches installed you can select a compatible Class II bike or cargo carrier. A link is provided at right for each product category.
You will need to ensure that the total combined weight of the carrier and its contents does not exceed the hitch or vehicle tongue weight capacity. You can check your owner's manual for any guidance as to the Camry's tongue weight capacity.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: 1-1/4" to 2" Hitch Adapter For Bike Rack On A 2011 Toyota Camry With The Draw-Tite 36416 Hitch
- Q&A: Recommended Hitch For A 2011 Toyota Camry LE V6 With Dual Exhaust
- Q&A: Can Thule Hitching Post Pro Fit on 2011 Toyota Camry
- Q&A: Will a 1Up Quickrack Trailer Hitch Mount Bike Rack Fit Draw-Tite Trailer Hitch # 36416
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Boat Trailer Hubs for #82655
- Q&A: Difference In Factory Lifestyle Hitch And Frame Mounted Hitch 2021 Kia Seltos
- Q&A: Removal of Black Plastic Covering on Underside of 2011 Toyota Camry to Install Hitch
- Article: Flat Towing Package for 2014-2018 Jeep Grand Cherokee
- Article: How to Measure for Trailer Hitch Drop
- Article: What Do I Need To Tow A Trailer?
- Article: Best Bike Racks for Electric Bikes
- Article: Troubleshooting Brake Controller Installations