Will Thule Replacement Cradles with Screws # TH8523387001 Fit Atlantis Cargo Box

Question

Question:

Hi, Will the Thule replacement cradle part TH8523387001 fit a model 686B Atlantis 1600?

asked by: Jim M

0

Expert Reply:

Yes, the Thule Replacement Cradles # TH8523387001 with Screws # TH05728 that you referenced are correct replacements for your Thule Atlantis series cargo box.

expert reply by: Adam R

0

Answer 1

For cradles for your Thule Ascent 1600 you'd want the part #TH8523387001.

view full answer...

Answer 2

The Replacement Thule AcuTight Cradle #TH8523387001 is a single cradle while the Thule Snapfit Cradle Replacement Kit #TH68NB contains 4 cradles and 4 screws.

view full answer...

Answer 3

The part you are looking for is the Replacement Cradle for Thule AcuTight and Quick Grip Mounting Hardware Item #TH8523387001. These are sold in quantities of 1. If you also need the screw to attach the cradle to the AcuTight mount it is #TH05728.

view full answer...

Answer 4

Thank you for sending in the photo to the separate email! Thule has changed hardware from time to time and sometimes hardware is compatible between different boxes. The clamps you have are definitely the Quick Grip Mount Assembly #TH05738 and from…

view full answer...

Answer 5

The Thule replacement quick grip mount assembly, part #TH05738, is the correct replacement hardware for your Thule Atlantis 1200 roof cargo box. See diagram to the right. The Thule quick grip mount #TH05738 will also work on Thule 1600 and 1800…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Will Thule Replacement Cradles with Screws # TH8523387001 Fit Atlantis Cargo Box

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching