Towing 1000 lb Maximum PWC and Trailer with 2008 Ford Focus
Question:
I have a 2008 ford focus. The owners manual says towing is not recommended. Would the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 be able to safely tow one jet ski and trailer? The combined weight will probably be about 800-1000 pounds.
asked by: Casey W
Expert Reply:
The Draw-Tite Class I hitch you referenced, part # 24805 would have a 2000 lb towing and 200 lb tongue weight capacity. Although the hitch would be physically capable of towing your PWC trailer, you will be limited to the capacity of the lowest rated component in the towing system.
The decision is ultimately yours, but I cannot personally recommend anything that would contradict the vehicle manufacturer's recommendations.
If you decide to tow your PWC, you'd also need the following:
Trailer wiring harness, part # 118457
Ball mount, part # 3593
1-7/8 inch trailer ball, part # 19256
2 inch trailer ball, part # 19258
I've linked you videos showing hitch as well as the wiring harness being installed,
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
