Wiring And Light Recommendations For Small Utility Trailer
Question:
I have a small utility trailer that needs new lights and wiring installed. It had a four pin connector on it when I purchased it.
asked by: Nathan
Expert Reply:
If you want to install a new 4-way connector on your utility trailer I recommend using something like part # A35W42B. This is a 35 ft 4-way wiring harness. I have attached a link to a helpful article that explains trailer wiring you can check out.
For trailer lights I recommend using LED lights. they are very durable and raw much less power than incandescent lighting.
For the right hand side of the trailer I recommend a light like part # STL8RB. This is an 11 diode light that features the stop, turn, and tail light. This light measures 5-1/4 inches long and 5 inches wide and is a surface mount. For the left hand you would order part # STL9RB.
The side marker lights I recommend are part # AL82AB. these are mini-rectangular LED clearance lights and are amber colored.
Products Referenced in This Question
Combination LED Trailer Tail Light - Submersible - 6 Function - 11 Diodes - Passenger Side
- Trailer Lights
- Tail Lights
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Square
- Surface Mount
- Submersible Lights
- LED Light
- 5L x 5W Inch
- Red
- Optronics
more information >
Combination LED Trailer Tail Light - Submersible - 7 Function - 14 Diodes - Driver Side
- Trailer Lights
- Tail Lights
- License Plate
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Square
- Surface Mount
- Submersible Lights
- LED Light
- 5L x 5W Inch
- Red
- Optronics
more information >
Product Page this Question was Asked From
35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 31 Feet and Longer
- Plug and Lead
- 4 Flat
- Optronics
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Why Does 4-Pin Trailer Wiring Have 5 Wires
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: Converting 7-Way Blade To 4-Way Flat On Trailer
- Q&A: What Gauge Wire does 4-Way Trailer Wiring Use
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Is 16 Gauge Wire Adequate for Trailer Wiring for Lighting
- Q&A: 4-Way Trailer Connector that has 5 Wires
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work