Rear Chrome Bumper for a 1997 Ford F-350 XLT Diesel

Question

Question:

hi im looking for rear chrome bumper for my truck, would like to know which one is the right one. 1997 f350 superduty xlt diesel. and maybe a front bumper if you have them too thanks

asked by: Pete

0

Expert Reply:

For your 1997 Ford F-350 XLT you would need # 21007-92230 for a rear chrome bumper. We do not carry front bumpers at this time.

expert reply by: Michael H

0

Answer 1

Looks like you have an older version of the 21007-92230 that you referenced which fits the following: 1973 - 1991 Chevrolet C/K Series Pickup 1973 - 1991 GMC C/K Series Pickup 1967 - 1983 Ford F-100, F-150, F-250, F-350 Standard Bed models 1992 -…

view full answer...

Answer 2

There are a few different chrome bumper options for the 1995 Ford F-150, see link. These are all universal fit bumpers. A Perfect Match (custom fit) is not available for the 1995 model year.

view full answer...

Answer 3

To replace the L-Brackets that come with the Draw-Tite Max-Frame Trailer Hitch Receiver #75186 (for your 1997 Nissan Pickup) you can simply use part #RHK and then input the info about your trailer hitch to get the replacement hardware.

view full answer...

Answer 4

I spoke with my contact at Curt and the mounting plate measures 4 inches front to back. Please note that the 10-1/2 inches is the center to center distance between the mounting holes for hitch #C19031. I have included a link to the installation…

view full answer...

Answer 5

You should have no problem using our etrailer.com Hitch Receiver Lock, #e98882, on the factory hitch of your 2005 Ford Excursion. We have not tested this hitch lock with the factory hitch on an Excursion, but we have not received any complaints…

view full answer...

Answer 6

Normally a bumper is rated at about 3500 lbs towing capacity. It is usually stamped somewhere on the bumper or possibly on a sticker. A frame mounted hitch is going to have more capacity for towing due to how it is installed. Also, most trailers…

view full answer...

Answer 7

Westin replacement bumper #66001-95300 is one option for your 1997 Nissan Pickup truck. It does come with a custom installation kit and license plate lights and wiring. The chrome option is #76001-95300. We also have #66000-95300 and #76000-95300…

view full answer...

Answer 8

You can get a complete replacement hardware kit for any of the trailer hitches we sell including Draw-Tite trailer hitch #24687. You will need #RHK. On the RHK page you will see a spot to enter the hitch number and choose the manufacturer. Click…

view full answer...

Answer 9

The Westin Fey Diamondstep Rear Bumper with installation kit #20002-92230 is rated for 800 pounds tongue weight and 8,000 pounds gross trailer weight. However, you will need to consult the truck owners manual to determine the towing capacity of your…

view full answer...

Answer 10

The Hopkins Vehicle Wiring Harness #HM43505 that you referenced is a confirmed fit for your 1995 Nissan Pickup and will work great to power trailer taillights that are either LED or incandescent.

view full answer...

Answer 11

Both of the Westin Fey Replacement Bumpers offered for your Nissan Pickup will work for vehicles manufactured after mid year 1986. Part #76001-95300 is the chrome Surestep Bumper, and part #76000-95300, the Westin Fey Diamondstep would both be a fit…

view full answer...

Answer 12

There is not a video of an installation on that particular vehicle. I did reach out to my contact at Curt to confirm that the correct hitch fit is #C13092. I've attached the installation details to assist with the installation. The Curt wiring…

view full answer...

Rear Chrome Bumper for a 1997 Ford F-350 XLT Diesel

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching