Coupler Lock Recommendations for a RAM Brand Trailer

Question

Question:

Will this lock fit a Ram brand trailer receiver?? Thanks,

asked by: Ken

0

Expert Reply:

If your RAM brand trailer has a collar-lock style coupler like the Bulldog Coupler # BD028444 yes the EZ Lock Trailer Coupler Lock # BLTL-20-40D would be an excellent choice as a trailer lock.

A more universal coupler lock that we offer is the Fastway Coupler Lock part # FA86-0015-318.

I attached review videos for both coupler locks for you to check out.

expert reply by: Jameson C

0

Answer 1

For a 2 inch hitch ball coupler to fit the 3 inch channel of the Demco Hydraulic Brake Actuator w/ Manual Lockout #DM8760011 the Bulldog Collar Lok coupler part #BD028584 would fit and work well.

view full answer...

Answer 2

It sounds like you have a Collar-Lok coupler such as #BD028244. For that type of coupler you could use lock #BLTL-23. The body is aluminum but the pin inside that goes way up into the coupler is steel. It fits 2-5/16 inch Collar-Lok couplers. For 2…

view full answer...

Answer 3

I have a few trailer coupler locks that will work for your RAM A-frame coupler. I recommend using a coupler lock like the Fastway Universal Coupler Lock, #FA86-0015-307. This coupler lock is offered with multiple part numbers. Each part number…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 9

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 12

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Coupler Lock Recommendations for a RAM Brand Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching