How to Use Quick Splice Connectors or 3M Scotchloks and Wiring Harness for 2014 Dodge ProMaster 3500

Question:

How do I use the blue splice taps in place of T connectors?

asked by: Dan J

Expert Reply:

To use the quick splice connectors, you will put the wire you want to splice into on the inside track of the connector. Then put the wire from the wiring harness # C56190 in the track next to it. Close the plastic clip and use some pliers to squeeze the connector to make the splice.

I have included a link to a video that shows our installer using the connectors. Go to about the 56 second mark to see it in action. Be sure to test the wires first with a circuit tester such as # PTW2993. This is necessary because there is no standard for wire colors.

But if you have a 2014 Dodge ProMaster 3500 you could just use # C56209. I have linked the instructions for you.

expert reply by: Michael H