Will Dexter 6K Hub Assembly Fit Four Winns Trailer
Question:
I was trying to buy a Dexter Trailer Hubs and Drums - 42655UC1 I was wondering does it fit a Four Winns Trailer Model number DO18190 Any help would be appreciated
asked by: Oscar P
Expert Reply:
The Dexter Trailer Hub Assembly, part # 42655UC1, is designed to fit 6,000 axles with a spindle that requires a grease seal with a 2-1/4 inch inside diameter.
There are a couple of ways you can make sure you get the right size hub for your trailer. There is normally a plate or sticker on the trailer or axle that states what the weight capacity is.
You can pull the bearings and seals from your trailer and look for the numbers as shown in the attached photo. If you cannot find the numbers on the bearing or seal, you can use a precision instrument like a digital caliper and measure the spindle in the places noted on the photo.
I have attached a helpful article that shows how to replace the bearings, seals, and races on a trailer hub you can check out.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Video: Review of Dexter Axle Trailer Hubs and Drums - Idler Hub Kit for 5,200 Lb Trailer Axles - 008-213-9B
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How to Find Correct Bearing Kit for a 2004 Four Winns Boat Trailer with 5,200 Lb Trailer Axle
- Search Results: 15245
- Search Results: 82655
- Shop: Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 5,200-lb Axles - 6 on 5-1/2
- Q&A: Replacement Boat Trailer Hubs for #82655
- Q&A: Replacement Trailer Hub for a 2004 Four Winns Boat Trailer with 6 on 5-1/2 Wheel Bolt Pattern
- Q&A: How to Find Bearing Numbers to Allow Selecting Replacement Hub for 1996 Four Winns Trailer
- Shop: Bearing Kit, LM67048/25580 Bearings, GS-2125DL Seal
- Search Results: 8~213~5
- Shop: Bearing Kit for Trailer Brakes with 12" Hub/Rotor - Easy Grease - 5,200 lbs to 6,000 lbs
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Shop: Timken Replacement Trailer Wheel Bearing - HM212049
- Shop: Timken 15245 Replacement Race
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK3-310 Review
- Article: Most Popular Wheel Bearings
- Q&A: What is the Best Grease for Trailer Bearings
- Shop: Trailer Hitch
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Video: etrailer Electric Trailer Brake Kit Installation
- Shop: Trailer Wiring
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Search Results: l44649
- Article: Trailer Tire Sizing
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Brake Controller
- Search Results: bearing buddy