Replacement Trailer Hub for a 2004 Four Winns Boat Trailer with 6 on 5-1/2 Wheel Bolt Pattern
Question:
Hello, I am trying to replace a hub from my 2004 four winns boat trailer. see attached pic The only identification numbers on the hub are 82655 and qrg 3. There are 6 studs spaced at 5.5
asked by: Patrick
Helpful Expert Reply:
The replacement hub that you will want for your 2004 Four Winns boat trailer is part # AKIHUB-655-6-EZ-K. This is a 6,000-lb hub with the same bearings, grease seal and 6 on 5-1/2 inch bolt pattern as your current hubs.
This hub comes with everything you need to install the hub except the bearing grease. If you would like to pick up extra bearing grease, I recommend our marine grease, # L54FR. These are 3 cartridges 3 ounces each, which you can use with or without a mini grease gun.
I have attached a table-top demonstration video of this hub as well as a trailer hub installation video for you to check out.
Products Referenced in This Question
LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Petroleum-Based
- Marine Bearing Grease
- Calcium Sulfonate
- 3 oz
- LubriMatic
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 6K Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Availability Of Hub/Drum Kit With Brakes And Hardware Similar To Part BPH1206EPR
- Q&A: Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment Trailer
- Q&A: Replacement Boat Trailer Hubs for #82655
- Q&A: Replacement For A Truryde RVD-H-65535 Hub
- Q&A: Recommended Hub for 15 Inch Wheel On 3,500 Lb Timbren Heavy-Duty Axle-Less Suspension
- Q&A: Galvanized 6 Lug Trailer Hub For a Spindle With 2.125 Grease Seal and 1.75/1.25 Bearing Sizes
- Article: Most Popular Wheel Bearings
- Q&A: Can Dexter 6 Lug Hub/Drum be Replaced with Standard Hub
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Article: Performance Chips and Modules
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Maintenance Schedule
- Article: A Better Way to Find the Best Campgrounds in Each State