Adding a 7-Way and Brake Controller to a 2007 Nissan Frontier
Question:
My 2007 Nissan Frontier HAS the two tow connectors on the driver side frame rail. My questions is that I see a lot of talk about installing relays under the passanger side kick panel. If i already have the factory tow connectors near bumper, do I need to do anything else to connect the 7 pin ? Also does the 7 pin handle electric trailer brakes?
asked by: Dave M
Expert Reply:
If your 2007 Nissan Frontier did not come with a trailer connector (not the connection points they would plug into) then in order to install a 7-Way you will need to install # 118266. This is the 7-Way connector and the jumper harness with the relays that install behind that passenger side kick panel. This is the correct harness if your Frontier did not come with a factory tow package.
The 7-Way trailer connector does handle trailer brakes but you will need a brake controller as well. I recommend the P2, # 90885, because it is easy to set up and use and it is reliable. You will also need the proper brake controller harness, # 3050-P. I have included links to a video and instructions that should help.
You would only use # 118267 if you were replacing a factory 7-Way trailer connector. It does not have the relays needed to make it active. The one sure-fire way to know if your truck has the factory tow package is to have the dealer run the VIN.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 7-Way Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 7 Round - Blade
- Tekonsha
more information >
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Replacement Wiring Harness for Tow Ready Nissan Vehicle Wiring Harness
- Accessories and Parts
- Custom Fit Vehicle Wiring
- Wiring Harness
- Tow Ready
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Troubleshooting Flashing Red LEDs On The Redarc Tow-Pro Liberty RED24FR
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Troubleshooting 4-Way to 7-Way Wiring Upgrade on 2006 Nissan Pathfinder
- Q&A: Recommended Wiring Harness And Brake Controller for 2008 Nissan Pathfinder With Factory Tow Package
- Q&A: Horse Trailer Ramp Spring For Helping Lift Heavy Ramp
- Q&A: How to Connect Two 6V Batteries for 12V Power
- Q&A: Do the AirLift 1000 Air Helper Springs for Coil Springs Fit 2020 Jeep Gladiator with 2 Inch Lift
- Q&A: Troubleshooting Redarc Tow-Pro Liberty Brake Controller on 2022 Honda Ridgeline
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Must-Have Flat Towing Components
- Article: The Best Towing Mirrors
- Article: What is the Best Trailer or RV Storage Cover