Hitch and Wiring Recommendation for a 2011 Buick Enclave Towing a Trailer with Surge Brakes
Question:
I have a 2011 Buick Enclave, it currently has no hitch or light harness. I need to install a hitch as well as a harness. The harness I need will be used on a boat trailer with surge brake so I need it to have a 5 flat or the large round found on most trucks today as I have the adapter to go from the 5 flat on the trailer to the 7 round on the vehicle. Can you steer me in the right direction?
asked by: Jason B
Expert Reply:
Lets start with a hitch. For that I recommend the Draw Tite hitch part # 75528 as this is the most popular hitch with other owners of 2011 Buick Enclaves. I attached an install video for you to check out also.
For a wiring harness lets start with a 4-way. For that you would want the Tow Ready Wiring harness part # 118450. This plugs in line with your tail light connectors. Install video attached as well.
Now to convert to a 5-way to work with your surge brakes you would want the Adapter 4 Pole to 5 Pole Trailer Wiring Adapter # 20036. To install this product you will need to tap into the reverse light circuit of your taillight harness. For more information check out the install video I attached.
For a ball mount, hitch ball, and pin and clip, I would recommend the etrailer Ball Mount Kit, part # 989900. This is a kit which includes 2 ball mounts, a 1-7/8 inch ball, 2 inch ball, and a hitch pin and clip.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 0 - 5 Feet Long
- 4 Flat
- Plug and Lead
- 5 Flat
- Tow Ready
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >