Adding a 7-Way Trailer Connector to a 2012 Jeep Wrangler Sport with Aftermarket 4-Way
Question:
Id like to attach a 7 way connector to tow a small popup. Im set up for a 4 flat now aftermarket. Any recommendations?
asked by: Eric
Expert Reply:
In order to install a 7-Way trailer connector on your 2012 Jeep Wrangler Sport you will need 4 to 7-Way adapter # 31785. On this adapter all you have to do is plug your existing 4-Way and ground the white wire to the Jeep frame. This will provide you with the basic light functions but nothing else (if you do not hardwire in the remaining wires on the # 37185).
If the trailer has electric brakes, accessories that run off of a 12 volt power source, and/or reverse lights, you will want to install # ETBC7 instead of # 37185.
The # ETBC7 includes the 4 to 7-Way adapter and all the wiring and accessories needed to make the other functions active. The only other thing you would need is a brake controller to controller the electric trailer brakes. I recommend the ever-popular and reliable P2 # 90885. I have included some links that show and explain the # ETBC7 installation for you.
A replacement 7-Way such as # HM42190 is designed to replace a damaged or missing factory 7-Way on vehicles that were originally equipped with a 7-Way from the factory.
Products Referenced in This Question
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Hopkins Endurance Quick-Install 7-Way Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 7 Round - Blade
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Q&A: How To Install a 7-Way Trailer Connector On a 2015 Jeep Wrangler Unlimited with Factory 4-Way
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Recommended Trailer Brake Controller for 2019 Toyota Tundra SR
- Q&A: Troubleshooting 7-Way Installation that Has No Right Turn or Stop Lights on Trailer
- Q&A: How to Install a Brake Controller on a 2015 Jeep Wrangler Unlimited with Factory Tow Package
- Q&A: Replacement Coupler for Dico 17550 Weld-On Coupler
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Article: How to Choose the Right Trailer Hitch Class
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Most Popular Wheel Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern