Replacement Fenders For 21 Ft EZ Loader Aluminum Trailer

Question

Question:

Hello, I have a 21 ft EZ Loader Alum. trailer and Im looking to replace both fenders. The fenders I have now are item # 250-023712-10 with the makers lights, red and amber, which I would like to keep. But I can also fabricate and install lights myself if you have something w/ out the cut outs for lights. Do you have something that will work for this trailer? Thank you

asked by: Bobby

0

Expert Reply:

I did some research and found that the number you furnished is a gray plastic fender that is for 14 inch tires. We do carry fenders that may work for you.

I recommend the Fulton Single Axle Trailer Fender with Top Step, part # F008564. This is a silver plastic fender with a top step, and has no cut-outs.

If you prefer the same fender but in black you can order part # F008554.

I have attached a product review video for these fenders you can check out.

expert reply by: Jeffrey L

0

Answer 1

I looked up pictures of your Echo Elite trailer and what you need is the part #ST70RB as an exact replacement.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The dimensions you have are nearly identical to the CE Smith #CE19504-2 you looked at. However, these are designed for 14" wheels. For 15" wheels you would need the Fulton #F008585-2. These are slightly longer and taller at 10-1/4"…

view full answer...

Answer 4

The CE Smith Single Axle Trailer Fender w/ Top and Side Steps - Black Plastic - 14" Wheels - Qty 1 #CE19504 is my recommendation for you. It is 43-1/8 inches long x 11 inches wide x 12-1/2 inches tall which will give you a skirt height of 11-1/2…

view full answer...

Answer 5

The best option we'd have to replace the fenders on your trailer would be the Fulton Single Axle Trailer Fenders with Top and Side Steps part #F008584-2. The measurements we have for this fender appear to be very similar to that of the brackets…

view full answer...

Answer 6

It sounds like you are looking for the EZ-LOADER Gray Plastic Fender for 13" Tires, w/Cutout part 5291132 and 5291131. These are made for 13" tires and have a marker light cutout. The closest thing I have is the CE Smith Single Axle Trailer…

view full answer...

Answer 7

For the 13" #CE19503-2 there is a distance between the two outside mounting on center of 33-3/4 inches and 29-3/4 inches between the two inside holes. The holes on the mounting surfaces are spaced apart 5 inches vertically and 2 inches…

view full answer...

Answer 8

I went out to our warehouse to take a look at both the CE Smith Single Axle Trailer Fenders - 12" Grey #CE19502-2 and the larger 13" Black #CE19503-2. Both options represent the only color available from CE Smith in the respective sizes.…

view full answer...

Answer 9

We have a very close option with the #CE19503-2 which is off by only 1/4 of an inch to the measurements you listed. It measures 29-3/4 inch for the inside portion and 33-3/4 inch for the outside portion.

view full answer...

Replacement Fenders For 21 Ft EZ Loader Aluminum Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching