Is Welding Required to Install the Tandem-Axle Trailer Hanger Kit # APT4 on a Trailer
Question:
Does the installation of this kit require welding?
asked by: Michael F
0
Expert Reply:
Yes, you will need to have a qualified welder weld on the hangers of the Tandem-Axle Trailer Hanger Kit # APT4 on your trailer.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 5-7/16" Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- Redline
more information >
Continue Researching
- Article: Double-Eye Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?
- Q&A: Why is Center Hanger Longer for Tandem Axle Trailer Hanger Kit
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Recommended Hanger Spacing for 24-7/8 Inch Long Leaf Spring with APT4 or APT3HD Hanger Kit
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Replacement Entry Door Lock On A 2004 Featherlight Horse Trailer
- Q&A: What is Bolt Hole Diameter for Suspension Hanger # E4139
- Q&A: Can Red Identification Light Bar be Used as Marker & Reverse Lights
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Correct Hanger Spacing For The APT4 Kit Using 25-1/8 Long Leaf Springs
- Q&A: Correct Hanger Spacing for the Tandem-Axle Trailer Hanger Kit Part # APT4
- Article: How to Raise Your Travel Trailer Height
- Article: How to Tell the Weight Rating of a Trailer Axle