Recommended 7-Way Connector for a 2024 Dodge Durango

Question:

Hi: I would like to purchase the curt 56336 4 pin trailer harness on my 24 Durango. Is there a way to turn this into a 7 pin system? Please advise.

asked by: John

Expert Reply:

Yes, there is but you'll need an additional part. You will need the Curt item # C56336 4-way you referenced but you'll also want the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your vehicle with an included bracket.

This kit is designed for use on a vehicle with an existing 4-way flat trailer connector and plugs directly into it. You will then connect the blue wire to the blue wire on the brake controller, connect the black wire to the positive post on your Durango's battery, the white wire to ground, and the yellow wire to your vehicle's reverse circuit. This will provide you with the ability to control your trailer's brakes and also provide you with a 12v power wire for you trailer's accessory lights.

expert reply by: Jerred H