7-Way to 4-Way Adapter for 2024 Hyundai Palisade

Question:

Looking for a 7 prong to four prong adapter for a 2024 hyundai palisade OEM trailer harness S8F67 AC700 Cant really determine which ones on your site will work. Thanks!

asked by: Linda C

Expert Reply:

Any 7-way to 4-way adapter will work with the 7-way on your Palisade. The # PK12716 you were looking at is usually what I recommend since it has a low cost and small size to store in the vehicle. If you want one that also acts as an extension you can use the # HM47065.

expert reply by: Robin H

Linda C.

5/1/2024

I have to disagree with you as far as any 7 to 4 will work. I have an adapter that I used on my 2017 toyota tundra & it does not work/fit. It was way too loose. Are you sure about your recommendations & what is your return policy? Thanks!

Robin H.

5/1/2024

@LindaC this fits any standard 7-way connection which is what it looks like you have from the picture you just sent. If the Pollak adapter ends up too loose, I would expect the same from any 7-way trailer connector as well which would really be a problem with the Hyundai part and not all of the 7-ways out there. Pollak also makes a lot of the OEM connectors you see on trucks and SUVs so in a sense they set the standard. Do you have the locking tab on the inside of the cover? If so it will be held in place and kept secure by that tab. I attached a link to our return policy below.

Helpful Links

customer-service-ordering.aspx#returns