What Size is the Threaded Portion on the Dometic Replacement Gauge for Valterra Water Regulator

Question

Question:

What size is the threaded portion of the gage? part A01-1125

asked by: David

0

Expert Reply:

David, the threaded portion on the Replacement Gauge for Valterra Adjustable Water Regulator # A01-1125 is 1/2".

expert reply by: Bryce D

0

Threaded Portion on the Replacement Dometic Adjustable Water Regulator
(click to enlarge)

Answer 1

I reached out to the manufacturer and they said there is a solution that is in many of the gauges for the water regulators like #A01-1125. They confirmed it is not water but a solution of some sort used in the manufacturing and testing. The solution…

view full answer...

Answer 2

Aluminum A-Frame Trailer Tongue Toolbox Item #350970 is weather resistant but not waterproof. For something to be considered waterproof it has to be able to be submerged under water for a certain period of time and not let water in. None of the…

view full answer...

Answer 3

There is no mounting hardware included with the Aluminum A-Frame Trailer Tongue Toolbox, item #350970, due to the different construction and mounting locations that may be required for many different styles of trailers. I would recommend using a…

view full answer...

Answer 4

From what I could find, the #171255UC grease seal has an inner diameter of 1.719 inches and an outer diameter of 2.565 inches. These dimensions match our TruRyde Double Lip Grease Seals, #RG06-050. If possible, I recommend verifying the inner…

view full answer...

Answer 5

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 6

So I have your hub narrowed down to a few different possibilities but we need to know what your bolt pattern is to know for sure. We have the part #84556UC3 for if your bolt pattern is 5 on 5 inch. We have the part #845476UC3 for if your bolt pattern…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

The Replacement Control Module for Lippert Electric Coach Step #LC301702 is the brain for your coach step with serial number 06190. We also have the following parts for your coach step: Replacement Motor for Lippert Electric Coach Step #LC301695…

view full answer...

What Size is the Threaded Portion on the Dometic Replacement Gauge for Valterra Water Regulator

Product Page this Question was Asked From

Continue Researching