Replacement Hub/Drum, Brakes, & Bearings For Camper With 3,500 lb Axle
Question:
I have a 2003 Coleman/Fleetwood Utah PopUp Camper with at 3500 Pound Axle and Dexter 10 inch x 2-1/4 electric brakes with 13 inch tires on a 5 on 4-1/2 lug pattern. Im interested in replacing my brakes, bearings, and drums and was wondering what setup would fit best.
asked by: Ryan
Expert Reply:
Hi Ryan; thanks for all that info and we do have exactly what you need to replace the hub and drums, electric brakes, and bearings on your pop-up camper with a 3,500 lb axle.
Just note the hub and drum comes with the bearings already, so you don't have to buy them separately, but I'll list out the bearing kit in case you want that for when you replace them down the road.
- Trailer Hub and Drum Assembly # AKHD-545-35-K
- Electric Trailer Brakes - Self-Adjusting # AKEBRK-35-SA
- Mounting Hardware for 10" Brake Assemblies # BRKH10B
- Hub Bearing Kit # BK2-100
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Trunk Bike Rack
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Difference Between RG06-050 and Timken TMK58ZR Grease Seal
- Q&A: Tips for How to Identify a Trailer Axle