Can the etrailer.com Locks Be Ordered Keyed Alike

Question

Question:

hello. i need keyed alike locks, DeadBolt Locks - 40107 in pairs of two. is this possible ? if so, how much would a set of two of these locks cost ? thanks much

asked by: Leonard

0

Expert Reply:

When you order our etrailer.com locks part # e98882, enter the quantity of the locks you want and then select "Keyed Alike" from the drop down menu and we will send you as many as you need and they will all use the same key.

I attached a review video for this lock for you to check out also.

Price is available on the product link below.

expert reply by: Jameson C

0

Answer 1

Yes, the etrailer.com Adjustable Trailer Coupler Latch Lock #e98883 that you referenced can be keyed alike. Once on the product page simply select "Keyed Alike" from the drop-down menu and all 4 locks you receive will use the same…

view full answer...

Answer 2

We have the Trailer Hitch lock part #e98882 which is a stainless hitch lock that would work well for you. This lock fits hitches that are up to 2-5/8 inches wide measured from the outside.

view full answer...

Answer 3

The Master Lock 1-7/8" and 2" Trailer Coupler Lock #ML377KA can be keyed alike meaning that if you ordered several we could make sure that all of the ones you receive would use the same key. The Master Lock Hitch Receiver #1481DAT…

view full answer...

Answer 4

We do carry a wide range of coupler locks depending on what span and diameter you need. For example, the etrailer Adjustable Trailer Coupler Latch Lock - 1/2" to 2-1/2" Span - 1/4" Diameter #e98883 and the etrailer Trailer…

view full answer...

Answer 5

According to Andersen, they do not recommend using any pins to attach the ball housing to the weight distribution system's shank which includes the Andersen Trailer Hitch Lock and Adjustment Pin Lock Set part #AM3493. They recommend that you…

view full answer...

Answer 6

It sounds like you want to use the hitch lock, like #e98882, in place of a regular hitch pin. Yes, you can absolutely use the lock instead of a hitch pin and it will work great to safely transport the trailer and boat. The hitch lock does not have…

view full answer...

Answer 7

What I recommend is using Master Lock Hitch Receiver and Coupler Latch Lock Set, #1481DAT. It comes with a coupler latch lock and receiver lock that are keyed alike.

view full answer...

Answer 8

We don't have a combo of the Curt Hitch Ball #C40008 and Curt Ball Mount #C45340. The ball mount is extremely heavy-duty, rated up to 17,000 pounds. I think it's safe to assume you don't have a torque wrench rated up to 450 foot pounds…

view full answer...

Answer 9

I will be happy to explain the best way to not leave marks on the Curt 2" Hitch Ball #C40034. When I tighten the nut when using the hitch ball I use several layers of duct tape or a towel on the shaft portion of the ball when tightening it. That…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Can the etrailer.com Locks Be Ordered Keyed Alike

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching