Replacement Wheel Stud and Electric Brakes for Tandem Axle Dump Trailer With 7k Axles
Question:
Hi, etrailer folks, I need a replacement stud and lug nut for my trailer. It’s a b wise, 16’ dump, tandem 7K SS axles, 8 lug on 6.5” I think?. Not sure if those are Dexter axles. Oh, and electric brakes. Is that enough to go on? Many thanks!
asked by: John W
Expert Reply:
There is no way to determine the correct replacement studs without more information. It could be 1/2", 9/16", or 5/8" so you will need to measure. I have attached a link below to all of our replacement wheel studs so you can choose the right one once you have your measurement.
Assuming this is a modern trailer with a standard 7k axle you can use the etrailer Electric Trailer Brakes # AKEBRK-7-SA. These 12" x 2" brake assemblies fit a 5 bolt brake flange pattern. They are self-adjusting so you don't have to worry about periodic manual adjustments. If you also need replacement hardware you can use the # BRKH12.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Mounting Bolts and Hardware for 12" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 12 Inch
- Bolts
- Redline
more information >
Product Page this Question was Asked From
Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2 Inch Long
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Replacement Wheel Stud for Lippert 3,500 lb Axle
- Q&A: Brake Controller And Wiring For 2023 Hyundai Palisade
- Article: Most Popular Wheel Bearings
- Q&A: Typical Trailer Lug Nut Diameter and Thread Pitch
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Does Gen-Y Hitch Gooseneck Trailer Hitch # GY23XR Fit 2024 Chevy Silverado 3500
- Q&A: Correct Bearing Kit for 2019 Jayco North Point 315RLTS
- Q&A: Replacing The Entry Door Latch Kit On A 2000 Featherlite Trailer
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Choose the Right Trailer Hitch Class
John C.
3/1/2024
Perfect. Thanks, Robin!