Replacement Bearing Kit for a 3,900 lb Axle
Question:
What wheel bearing kit do I need for my TT wheels? The axle tag says Capacity: 3,900 lbs?...doesnt specify. The Dexter # is 9798179. Its a 19 foot single axle camper trailer. Your categories seem to jump from 3,500 to 4000 pounds, so Im at 3,900. Thank you.
asked by: Thomas G
Expert Reply:
Hey Thomas, thanks for reaching out!
According to my research your 3,900 lb axle should use the same bearing parts as a 3,500 lb axle so you should need the Hub Bearing Kit for 3,500 lb with #84 Spindle # BK2-100.
This uses an L68149 inner bearing, an L44649 outer bearing, and a grease seal with a 1.719" ID and 2.565" OD so you'll want to verify this on your end as well.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Difference Between RG06-050 and Timken TMK58ZR Grease Seal
- Q&A: Tips for How to Identify a Trailer Axle
Tom G.
2/29/2024
Thanks for the detailed reply, Jon. I appreciate it. When the weather gets better I'm going to unwrap the camper (still freezing up here in the Northeast) and get the wheel off so that I can double check the numbers on the races and bearings, just to make sure. Then I'll order the parts as long as the shipping won't take too long. Have a great day!