Mounting Hole Dimensions for the Ultra-Fab Universal Access Door # UF48-979010

Question

Question:

Hi. Im looking for a panel to cover a 6x6inch hole. This one looks perfect, but I was wondering if you could tell me what the spacing is between the holes in both the vertical and horizontal dimension. Hopefully they are spaced more than 6inch apart so they can cover my hole.

asked by: Ken

0

Expert Reply:

I attached a picture that shows all the mounting hole dimensions of the Ultra-Fab Universal Access Door # UF48-979010.

It looks like it should work for you since you said you need the corner holes to be more than 6 inches apart.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The only way to attach a Thule roof rack to your 2021 Jeep Wrangler Unlimited Hardtop is going to be with a gutter mount solution like the #TH711500 and #TH65BJ. There isn't a way to adapt a Traverse foot to the hardtop of your Wrangler.

view full answer...

Answer 2

There is no preferred crossbar spread listed for the paddleboard carriers we offer. They do however list the minimum crossbar spread at 24-inches. This is the minimum distance needed for part #TH811XT and #Y04075. Both carriers have weight capacities…

view full answer...

Answer 3

Sway control is designed to be used in situations where the trailer sways under adverse conditions such as high winds or when large vehicles are passing causing the trailer to become unstable. Sway control also helps if you have to maneuver suddenly.…

view full answer...

Answer 4

I went to take some measurements of the Valterra EZ Valve Double Electric Waste Valves #E85-8 and found it was about 12 inches wide as in the accompanying photo. The depth was more difficult because it is electric and there are wires on either side…

view full answer...

Answer 5

Although I don't know if it will fit on your 2008 Jayco ZX Recon specifically, I can give you the dimensions of the Ultra-Fab Universal Access Door #UF48-979010 so that you can do some measuring on your end to ensure fitment. The door has an…

view full answer...

Answer 6

Your solar power controller is perfectly compatible with the Progressive Dynamics Pure Sine Wave Inverter w/ Transfer Switch #PD44FR that you referenced.

view full answer...

Answer 7

The diameter of a 275/80R-22.5 tire is normally around 39-3/4 inches so you need a tire cover that fits 40 inch tires. A good option for a 40 inch spare tire cover is Camco part #CAM45251 in black. The Camco tire covers are designed with an UV…

view full answer...

Answer 8

I think I understand what you are looking for; a trailer-exterior-mounted panel with connection ports for 12V power, air, etc that you could mount in your preferred location on the enclosed trailer after making a suitable hole for it. We do not have…

view full answer...

Answer 9

For anything vertical that you're trying to seal or if you're under the trailer sealing and don't want the sealant to drip down you'll need Non-Sag Sealant for RVs #344270341437-1. For anything on top of the trailer that you need to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Mounting Hole Dimensions for the Ultra-Fab Universal Access Door # UF48-979010

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching