Which Over-Under Kit For 3,500 lb Lippert Axles on Jayco Jay Flight Tavel Trailer
Question:
Hello. I have a 2017 Jayco Jay Flight SLX 212QBW travel trailer. It has Lippert axles on it. They are 3500# axles. Attached is a photo of the sticker that is on the axle. Im looking for a kit to flip the axles and am wondering if part # K71-0384-00 or K71-0385-00 would work on my axles?
asked by: Frank
(click to enlarge)
Expert Reply:
Hello there Frank, and thanks so much for that info. The answer to your question is 100 percent yes, you can use one of the Dexter Over/Under kits on your Jayco travel trailer with 3,500 lb Lippert axles. Those are 2-3/8" diameter axles, so the correct kit is the following:
- Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Tire Sizing
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Slipper Spring Trailer Suspension System Review
- Article: Double-Eye Trailer Suspension System Review
- Q&A: How to Raise a 5th Wheel Trailer so it Rides Level
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Wiring Diagrams
- Q&A: Dimensions for the MORryde ALLTREK 4000 Suspension Kit
- Q&A: Double Eye Leaf Springs For Tandem Axle Trailer With 10,500LB Rating and 24" Length on Spring
- Q&A: Does MORryde ALLTREK 4000 Cushioned Equalizer Sit Taller to Offset for Additiona Suspension Movement
- Q&A: Can 3,500 lb Axle Trailer Leaf Spring 25-1/4 inch get Replaced with 5k Rated Spring
- Q&A: What Leaf Spring Width SHould be Used with Dexter Over Under Kit # K71-384-00
- Q&A: Would Dexter 3,500 lb Axle Made in 1999 Use Same Hubs as Current