Are There Any Sliding Hitches Compatible With The Reese Max Duty Underbed Mounting System

Question

Question:

Hi there - is there a slider hitch that works with the Reese Max Duty™ Underbed Mounting System, 14,000 lbs. Capacity, Ford, Compatible with Ford F-150 PART NO 30952

asked by: Norm H

0

Expert Reply:

The Reese Max Duty Underbed Custom Mounting System # RP32VR is designed with a different spacing (29" x 16-3/16”) than other puck systems and is currently only compatible with the Reese M5 5th Wheel Trailer Hitch for Max Duty # RP72VR and Reese Above-Bed Gooseneck Trailer Hitch for Max Duty # RP62VR. At this time there isn't a slider version of the Max Duty 5th wheel hitch but Reese will likely offer one in the future.

If you have a 6-1/2' bed then I recommend the B&W Companion 5th Wheel Trailer Hitch w/ Slider # BWRVK3400-5W along with the Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches # BW57FR to keep your bed clear.

If you have a 5-1/2' bed then I recommend replacing your trailer's pin box with a rotating pin box and then using a fixed hitch like the B&W Patriot 5th Wheel Trailer Hitch # BWRVK3200 and base rail kit # BW39FR.

expert reply by: Kevin C

0

Answer 1

Yes, it will! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY43XR is specially designed to work with the Ford factory puck system. It will push the connection point for the gooseball and your cattle trailer back 5" towards your…

view full answer...

Answer 2

If your rod is 1-1/4" diameter, then it sounds like you have a 12K Bulldog Trailer Jack for which the Replacement Screw and Nut Kit part #BD500217 at 17" long x 1-1/4" diameter most closely resembles the Replacement Rod and Nut Kit…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Yes, we have an application that will work with your 2019 Ford F-150 with 5.5' bed and Lippert Turning Point Pin Box. With that set-up you are going to need to use a fixed hitch. I recommend the Reese M5 5th Wheel Trailer Hitch #RP30928. This…

view full answer...

Answer 5

The wires are ran to the rear of your 2018 Ford F-150 that you'll need to wire up a 7-way but they stop at a connector that's in the frame rail of the truck. So the adapter you need is the part #37185 which your 4-way will plug into and then…

view full answer...

Answer 6

Excellent question, and there is anti-corrosion protection for the aluminum bed of your 2018 Ford F-150 that comes with the B&W base rails and install kit that fits your truck, though it is not in the form of shims. What the kit comes with is a…

view full answer...

Answer 7

Yes, you can use the RoadActive Suspension Custom Leaf Spring Enhancement Kit part #RAS3611-YHD with a weight distribution system on a Ford F-150. The spring bar tension won't be as high with the RAS as it woud be without but aside from that…

view full answer...

Answer 8

There should be a sticker or plate on the pin box itself that lists the manufacturer and model of the pin box. If it is not present then there are some measurements you can take to determine the model of the pin box. I have included a link that…

view full answer...

Answer 9

In order to choose the correct Trailair Pin Box for your Keystone Laredo you will need to know the manufacturer and model number of your current pin box, which should be on a sticker or stamp somewhere on the pin box itself. If you cannot find it,…

view full answer...

Answer 10

Lippert 1621 5th Wheel Pin Box - 15,500 lbs Item #LC1191191 weighs approximately 100 pounds including the wings the pin box bolts to. Lippert 1621 5th Wheel Pin Box - 21,000 lbs Item #LC1387882 weighs approximately 115 pounds including the wings the…

view full answer...

Are There Any Sliding Hitches Compatible With The Reese Max Duty Underbed Mounting System

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching