Is there a Sliding Ladder Rack for a 2024 Ford F-250 w/ the 6-3/4 Foot Bed?

Question

Question:

Is there a sliding truck bed ladder rack that fits a 2024 Ford F-250 with the shorter bed?

asked by: Roger

0

Expert Reply:

Yes, there is! There are actually two options to add a sliding ladder rack to your 2024 Ford F-250 with a 6-3/4' bed. They're both made by Thule, attach to the stake pockets of your F-250, and have a 1,250 lbs. The main difference between the two are one has a cantilever section that extends over the top of your roof. I have listed both options below:

With Cantilever - Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever item # TH43003XT-785EX

Without Cantilever - Thule TracRac SR Sliding Truck Bed Ladder Rack item # TH43003XT-785

expert reply by: Jerred H

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 4

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 5

The SuperSprings #SSA22 would be a smart choice to raise your 2012 Ford F-250 when pulling your fifth wheel. They are designed to prevent the sagging you are experiencing and should put you pretty close to level. If you take a look at the attached…

view full answer...

Answer 6

The pin weight of a 5th wheel trailer will usually be around 20% of the trailer's gross trailer weight (GTW) rating. The only real way to find the loaded pin weight of your 5th wheel trailer would require access to a commercial scale used to…

view full answer...

Answer 7

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 8

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 9

I have the perfect solution for you with the TruXedo Elevate Truck Bed Rack System #TX46NV. It's compatible with your BAKFlip MX4 tonneau cover and the towers adjust to either 18" or 28" tall. It has multiple mounting points for the…

view full answer...

Answer 10

To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture). If you don't see these in your…

view full answer...

Answer 11

I do have some options for you but the Thule TracRac SR Sliding Truck Bed Ladder Rack part #TH43002XT-508 and the BAKFlip MX4 Hard Tonneau Cover part #BAK48329 are not a good fit. The rails on the SR are rather wide so they would likely overlap with…

view full answer...

Is there a Sliding Ladder Rack for a 2024 Ford F-250 w/ the 6-3/4 Foot Bed?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching