Replacement Mounting Hardware For A Thule Cascade XT Rooftop Cargo Box

Question

Question:

The video and associated information for this product says that it will fit a Thule Cascade. Would it also fit a Thule CascadeXT?

asked by: Lake

0

Expert Reply:

The Replacement EasySnap Mounting Hardware for Thule Time Travel ES Series Cargo Boxes # 05704 will only fit your Cascade XT cargo box if it already has the quick-snap style mounting hardware. If not, then you'll need the Replacement QM3 - Quick Mount Hardware # TH04997.

expert reply by: Kevin C

0

Answer 1

The ES in the Frontier ES means easy snap. As you have already guessed, the hole spacing is different and you would have to modify the box in order to use an alternate mounting kit on a non-ES box. Modifying the box will compromise the structural…

view full answer...

Answer 2

Yes the Replacement QM3 - Quick Mount Hardware #TH04997 is the correct mounting hardware for the Thule Cascade cargo box you have and would fit the factory bars of your 2007 Honda Pilot.

view full answer...

Answer 3

The u-bolt that you are looking for is no-longer available. We have two different options depending on what mounting hardware your Cascade has. The Replacement EasySnap Mounting Hardware #05704 if your box has the quick snap hardware or the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

There are not any set numbers for how much of a dip you may see in your miles per gallon with the Thule Pulse Large Rooftop Cargo Box #TH615 on your 2021 Toyota 4Runner. There have been some test done and most indicate that you will see around a 15%…

view full answer...

Answer 6

I believe there were some changes in the Thule Mountaineer designation as the model continued to be released. The Thule Mountaineer TT or 669TT manufactured from 2005-2008 is the only version of the mountaineer to use the #TH04997. Technically this…

view full answer...

Answer 7

Your Thule Evolution 1600 6410 cargo box used the EasySnap Mounting Hardware Kit, which is now obsolete. Therefore, your best and closest option is to use the Replacement QM3 - Quick Mount Hardware #TH04997 to attach the box to your Malone AirFlow2…

view full answer...

Answer 8

We may have something you can use. Though we do not carry spare parts for the Thule Evolution specifically, you might be able to use the Thule Replacement U-Bolt for the Sidekick Cargo Box, part #TH02943. It's about 4 inches wide and 1-5/8 to…

view full answer...

Answer 9

You can retrofit the older style Thule Box to fit aerodynamic bars with the EasySnap Mounting Kit for Thule Cargo Boxes #TH05820. However, the u-bolts that come with the EasySnap mounting kit may not fit the holes in your older box so you may need to…

view full answer...

Answer 10

There isn't a Rota-Flex for the Rhino, but there are MORryde cushioned pin boxes. That said, they won't add any length, they'll just improve your ride compared to the standard pin box. If that's okay go with the right one for your…

view full answer...

Answer 11

Yes, the Replacement EasySnap Mounting Kit part #TH05820 will fit your Thule Adventurer 650 Cargo Box but you might need to drill one new hole for each of the u-bolts but this will not affect anything with the box and it will be your only option if…

view full answer...