Will the Hollywood Racks 2 Bike Extension Work w/ the Sport Rider SE Bike Rack?

Question

Question:

Will the attachment to make it a 4 bike carrier work with this. I have 2 E bikes and 2 regular bikes.

asked by: Scott P

0

Expert Reply:

No, it will not. The 2 Bike Add-On for Hollywood Racks Sport Rider SE2 item # HR1475Z only works with the Hollywood Racks Sport Rider SE2 item # HR1450Z. The SE2 Bike Rack has a 50 lbs per bike capacity so hopefully your e-bikes can still work with this lower capacity.

expert reply by: Jerred H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 3

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 4

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 5

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Answer 6

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 7

The RockyMounts MonoRail bike rack you'd looked at, part #RKY10004 is a great bike rack, but it wouldn't work well with bikes that have fenders like your Aventon Aventure Fat tire ebikes. The front fender would prevent the bike retaining hook…

view full answer...

Answer 8

At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and the…

view full answer...

Answer 9

In order to use a hitch-mounted bike rack like the Swagman Original #S64152-2 that you were looking at while towing a vehicle, you will just need to add the Roadmaster Dual Hitch Receiver Adapter #RM-077-4. This adapter will slide into the 2 inch…

view full answer...

Answer 10

For a 70 lb E-bike with fat tires we really only have one option that will work well. That's the Hollywood Racks #HLY84FR that has a weight capacity of 80 lbs per bike and can accommodate tire widths of up to 5 inches. It can also carry up to two…

view full answer...

Answer 11

Only certain bike racks are rated by the manufacturer for use behind RVs or trailers. This is simply because the ride at the rear of an RV is significantly rougher when compared to the rear of a standard passenger vehicle. The reason for this is that…

view full answer...

Will the Hollywood Racks 2 Bike Extension Work w/ the Sport Rider SE Bike Rack?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching