Replacement 13 Inch Trailer Tire Needed for Old Utility Trailer With 4 Lug Bolt Pattern
Question:
I have an older utility trailer with 175-80-13 in. wheels. I need a replacement rim that is rated at 1550 - 1650 lb. dot rating. 4 hole lug nuts, solid steel. I am not concerned about the fancy looks - ie spokes, pin striped ect. I just need a heavy duty load rated rim. does this rim have the load rating of 1660 lb. stamped in the rim? if it does then this is the type of rim I need. again load rating is very important for me on this utility trailer that will be used for heavy loads. I have searched and found very few rims that are rated at 1660lb. thanks
asked by: Roy G
Expert Reply:
I went out to the warehouse and verified that the Americana Conventional Steel Wheel, # AM20202, is stamped for 1,660 lbs at 65 psi. This wheel has a 4 on 4 inch bolt pattern and is 13 inches in diameter by 4-1/2 inches wide.
If you want new tires as well, I recommend checking out the Kenda Karrier ST175/80R13 Radial Trailer Tire, # AM10210, or the Kenda Loadstar ST175/80D13 Bias Trailer Tire, # AM1ST77. These are load range D tires with a weight capacity of 1,610 lbs at 65 psi.
If you also need a valve stem, you can use part # AM20903, which can handle a maximum tire pressure of 65 psi.
![John H](https://images.etrailer.com/static/images/catg/people/428_tn.jpg)
Products Referenced in This Question
Karrier ST175/80R13 Radial Trailer Tire - Load Range D
- Trailer Tires and Wheels
- Tire Only
- Radial Tire
- Load Range D
- 175/80-13
- 13 Inch
- M - 81 mph
- Kenda
more information >
Loadstar ST175/80D13 Bias Trailer Tire - Load Range D
- Trailer Tires and Wheels
- Tire Only
- Bias Ply Tire
- Load Range D
- 175/80-13
- 13 Inch
- M - 81 mph
- Kenda
more information >
Americana Rubber, Snap-In Valve Stem - 1-1/4" Long - Up to 65 psi
- Tire Repair Tools
- Valve Stems
- Snap-In Stem
- 8 Inch Tire
- 10 Inch Tire
- 12 Inch Tire
- 13 Inch Tire
- 14 Inch Tire
- 15 Inch Tire
- Rubber
- 65 psi
- Black
- Americana
more information >
Product Page this Question was Asked From
Dexstar Solid Center Steel Wheel - 13" x 4-1/2" Rim - 4 on 4 - White Powder Coat
- Trailer Tires and Wheels
- Wheel Only
- 13 Inch
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Continue Researching
- Q&A: Replacement 4 on 4.5 Bolt Pattern Trailer Rim and Radial Tire
- Shop: Dexter Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 72" Long - 2,000 lbs
- Q&A: Availability of 13 Inch Wheel with 4 on 4-1/2 Inch Bolt Pattern
- Article: What is Boondocking
- Q&A: What is the Difference Between Trailer Wheels and Vehicle Wheels
- Q&A: How to Determine Fitment of the Trailer Idler Hub Assembly # AKIHUB-555-35-EZ-K
- Q&A: Replacement Trailer Hub Assemblies For 3,500LB Axles Using L68149 Inner and L44649 Outer Bearings
- Q&A: Recommended Wheel and Tire To Replace 4.50-10 Tires On Concrete Mixer
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Measuring a Trailer Tire
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Lighting Requirements
- Article: Roof Rack Information