Replacement Lens Recommendation for a Bargman 59 Series Light with SAE-A-P2-83 Stamp

Question

Question:

Will the lens of the MC32RB fit properly to replace a lens marked T. Bargman 59inch and SAE-A-P2-83? The shape and size 2x4 are the same. Thank you.

asked by: Erik J

0

Expert Reply:

If you are looking for a red lens for your Bargman 59 Series light you would want part # 34-59-010, if you need an amber lens you would need part # 34-59-012.

expert reply by: Jameson C

0

Answer 1

Based on my research the Shelby 5101 is an A-frame coupler with a 2" ball and 5,000 lb capacity. We have exactly that with the A-Frame Coupler #CA5100B, which has a trigger latch and has a black paint finish. The same coupler is available…

view full answer...

Answer 2

We do offer a direct replacement for the Shelby 5101 A-Frame Trailer Coupler, it's the A-Frame Coupler part #CA5100B for black or part #CA-5100-Z for zinc. These couplers both have a 5,000 lb weight capacity with 2" hitch ball. In…

view full answer...

Answer 3

I looked up your Shelby 5101 trailer and it is an a-frame trailer that has a weld on a-frame coupler that has a jack mounting hole built into it. So since the coupler uses a non-standard bolt pattern for the jack I'd recommend replacing the…

view full answer...

Answer 4

The AT94023 is the correct replacement but unfortunately all Atwood water heater units are currently unavailable but I do recommend the Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU - 16" x 16" Door Item…

view full answer...

Answer 5

The most direct replacement would be the model GC10A-4E, this is not a heater currently available. However, the better, in my opinion, replacement water heater would be a tankless system. The Furrion RV Tankless Water Heater, #FR98SR, has…

view full answer...

Answer 6

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 7

If the base of your marker light, #1A-S-9, is part of the Kaper II Trailer Light #1A-S-100A, then the correct replacement base is the Optronics Rectangular Marker Light, #MC32RB. This marker light comes with a red lens and the replacement red…

view full answer...

Answer 8

Hello Barbara, we certainly should have the correct replacement clearance lights for your 2012 Thor Hurricane 32A motorhome. That said, I do not have a way to know exactly what light you will need based on a year make and model of RV. Based on the…

view full answer...

Answer 9

The SAE number of a trailer light isn't always the best way to pick out a replacement light since that isn't a part number. But most likely you are looking for a #MC32RB which measures 4 inch by 2 inch. If not, check out the link I attached…

view full answer...

Answer 10

I was able to find the exact replacement amber (1A-S-20A) and red (1A-S-20R) lenses. I did a Google search on kaper2 (or Kaper II), and found replacement lenses. Their replacement lenses are shown as measuring 4 inches long, by 2 inches wide by 3/4…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

I spoke with Lippert and they said the Kwikee 35 Series Electric RV 1-Step part #LC3691461 will be a direct replacement for the Coach Steps 725-0041. It will be a bolt-on install for the most part for the exception of changing out the door switch…

view full answer...

Replacement Lens Recommendation for a Bargman 59 Series Light with SAE-A-P2-83 Stamp

Product Page this Question was Asked From

Continue Researching