Does the B&W Ball and Safety Chain Kit BWGNXA2061 Fit the Puck System in a 2023 Chevy Silverado 2500

Question

Question:

I had the gooseneck ball and safety chains stolen out of my new Silverado. Does this fit the puck system in a 2023 Silverado 2500?

asked by: Calvin

0

Expert Reply:

Sorry to hear about your troubles. Yes, the B&W Ball and Safety Chain Kit item # BWGNXA2061 does fit the puck system in your 2023 Chevy Silverado 2500.

expert reply by: Jerred H

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 4

The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box part #GY58GR is primarily designed for long bed trucks. It's no different than a standard fifth wheel pin box in regards to the size. If you were using a fixed hitch and standard pin box before with…

view full answer...

Answer 5

Thanks for the pictures and information! I just heard back from my contact at Lippert and your 2024 Keystone Cougar has a 1621 pinbox. You will need the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item #GY58GR you were looking at. You will also need…

view full answer...

Answer 6

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

Hi David, Rock Tamers require an inch of space on the ball mount shank in order to mount. If the portion of the shank exposed where you'll be installing the Rock Tamers is 2" x 2" then you'll want #ERT00108, for 2.5" x…

view full answer...

Answer 9

To flat tow a 2024 GMC Sierra 2500 you will need the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Direct-Connect Base Plate item #e84ZR Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms…

view full answer...

Answer 10

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY38FR is not going to allow for any additional turning clearance than the 5th wheel king pin with a fixed point hitch. We have offset gooseneck ball options depending on what type of…

view full answer...

Answer 11

Hi Robert, To install your Putco Blade LED Tailgate Light Bar #P22KR you'll need to just remove the tail lights so that you can get access to the back wiring in the back of them. The plug-and-play connectors on the wire harness with have a male…

view full answer...

Answer 12

Hi Chris, Yes, the Demco LED Light Bar for Towed Vehicles w/ Wireless Transmitter #DM36MV is approved and legal for flat towing your vehicle. It's designed to attach to the rear window with a suction cup and face rearward so that others on the…

view full answer...