Availability Of Hardware Kit For Mounting a Manik Brush Guard On A 2003 Chevy 2500

Question

Question:

I bought some hardware for a brush guard and its for a Nissan frontier not for the vehicle I want to put the brush guard on. Is there any brush guard mounting bracket for a manik brush guard for a 2003 chevy silverado 2500?

asked by: Brandon F

0

Expert Reply:

The only brush guard mounting kit we offer for a 2003 Chevy 2500 is the Hardware Kit for Westin Sportsman Grille Guard # 40-124PK. This is made only for the Westin Sportsman Grille Guard, and will not work with other brands. We do not carry the manik brush guards so unfortunately nothing we offer will be compatible. Your best bet would be to get something direct from Manik, or to have something fabricated.

expert reply by: Jesse M

0

Answer 1

If you have the Westin Sporstman for your 2004 Yukon XL 1500 then you have part #40-0335. The replacement mounting hardware then is #40-033PK. Keep in mind the Sportsman will not fit your Yukon XL if it's a Denali model.

view full answer...

Answer 2

The Westin Sportsman Grille Guard part #40-0335 is a fit for a 2002 GMC Sierra 1500 but it will require that the tow hooks be removed from the vehicle as they occupy the same mounting holes as the grille guard. That said, this will be the case for…

view full answer...

Answer 3

The thing about the Westin grille guards is that they and the mounting hardware are both designed to fit specific vehicles. It would be awesome if you could take a grille guard from one vehicle and mount it to another with just the right hardware,…

view full answer...

Answer 4

The Aries hardware kit #AABRKT-4043 you referenced is the correct kit for the #AA4043 which fits 2001 - 2006 Chevrolet Tahoe 1999 - 2000 Chevrolet Silverado 1500 2000 - 2006 Chevrolet Suburban 1500 2001 - 2002 Chevrolet Silverado 1500 LD 2000 - 2000…

view full answer...

Answer 5

The Replacement Hardware Kit for Aries Grille Guard part #AABRKT-4068 is designed for Aries Grille Guard part #AA4068 and part #AA4068-2 which are designed for Chevy trucks. Grille Guard are vehicle specific and the hardware is specific to the…

view full answer...

Answer 6

We do have what you are looking for. The part number you need is #AABRKT-4068 which is a fit for the Grille Guard part #AA4068-2 that you referenced. This also fits the #AA4068.

view full answer...

Answer 7

The correct Aries grille guard hardware for your 2005 Chevy Avalanche 1500 is the part #AABRKT-4059 actually.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...