Replacement Spindle For Dexter #9 Torsion Axle Rated For 2,500lbs
Question:
Need a replacement spindle for #2500 dexter torsion axle s/n 122134619
asked by: Wray M
Expert Reply:
The #84 E-Z Lube Spindle # TRU74FR is the size spindle used on your 2,500lb Dexter torsion axle with serial number 122134619. This spindle has an E-Z lube grease zerk on the end of the spindle like our current spindle.
I was able to determine your axle came with the Dexter Brake Kit # 23-26-27 and 2 of the Hub/Drums # 84546UC3-EZ if you want to also replace these parts when replacing your spindle.
Products Referenced in This Question
Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Q&A: Which is Better an EZ Lube Spindle or a Bearing Buddy Setup
- Q&A: Removing and Replacing Trailer Spindles
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Flange Bolt Pattern and Distance From Flange To Rear Of #84 E-Z Lube Spindle TRU74FR
- Q&A: How to Tell if a Trailer Spindle is Damaged or Needs to be Replaced
- Q&A: Replacement Hub and Spindle for TDE 11033 Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Q&A: Replacement # 84 Spindle Recommendation to Replace a Trailer Spindle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer