Is There Procedure For Reversing With Dexter Actuator T43397007K to Not Engage Brakes
Question:
What is the procedure when backing up so that the surge brake does not engage and lock the trailer brakes?
asked by: Bill
Expert Reply:
So there isn't a procedure, but there are a couple of different ways you can reverse without engaging the brakes using the Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs # T43397007K.
The first is if your trailer has free-backing trailer brakes which won't engage while reversing; you can just back up like normal. Otherwise, what you can do with this actuator to make the brakes not engage is add the Solenoid Valve # T4748800.
Products Referenced in This Question
Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Solenoid
- Valve
- Dexter
more information >
Product Page this Question was Asked From
Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Bolt-On
- 7000 lbs GTW
- 1-7/8 Inch Ball Coupler
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Dexter
more information >
Continue Researching
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Q&A: Replacement for Atwood Surge Brake Actuator 82541
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Can the Replacement Atwood Master Cylinder 85736 Still Be Obtained
- Q&A: Surge Brake Actuator Recommendation to Replace Fulton A60 on Trailer
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Q&A: How to Convert a Trailer with Surge Brakes to Electric Over Hydraulic Brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)