Will SmartPlug RV Power Inlet Cover Existing Round Inlet Hole

Question

Question:

Looking to replace a cable hatch connection with a round cover with the product. Does it include or is there an adapter plate available to fill the rest of the hole? Or does this fit into the existing hole and will just have a different screw pattern to attach to camper?

asked by: Richard H

1

Helpful Expert Reply:

The SmartPlug RV Power Inlet and Connector # SM77FR is designed to fit standard flanges so you can use your existing screws and holes. The mounting plate typically covers the old hole despite the different shape, no adapter plate is available. It measures 3.25" wide x 4.5" tall if you want to measure to be sure.

expert reply by: Robin H

1

Answer 1

I definitely agree with you there Dave, it would be a very nice option to have, but a 90 degree cord is not something made for the 50 amp SmartPlug RV Power Inlet and Connector #SM76FR. I will say the way the plug connects does make it a better, more…

view full answer...

Answer 2

The 15,000 Btu Furrion air conditioner is what I would recommend and what I have on my trailer. Since it is an enclosed trailer I'm guessing you want the manual distribution box. You can choose from the following based on color: -Furrion Chill HE…

view full answer...

Answer 3

I sure can; I have added a photo for you with the dimensions of the mounting hole for the 50 amp SmartPlug inlet and connector. This comes in your choice of three different colors, and the dimensions are the same for each: - Black: SmartPlug RV Power…

view full answer...

Answer 4

For a keyless door latch we have the Global Link Ultra E Pro Electronic Lock for Travel Trailer w Keyed Alike Option #295-000183 which installs on the left side of the door (when looking at it from the outside) but the cutout requirement is much…

view full answer...

Answer 5

I really like the Furrion Chill HE RV AC units like the 15k BTU part #FR32PR. We have found that the Furrion units blow the coldest and are the quietest. This kit comes with an air distribution panel and comes with everything needed to install.

view full answer...

Answer 6

The female end, or the power inlet, with the weather resistant cover is 3.25 inches at its widest point. 4.5 inches tall and 3.75 inches long. The male side of the plug is 4 inches long 3 inches wide and 3 inches tall. Here are the two different…

view full answer...

Answer 7

Yes, the conical cordseal and install tool is indeed included with the SmartPlug RV Power Inlet and Connector - 30 Amp - White #SM77FR.

view full answer...

Answer 8

Hey Paul, For the stainless steel version of part #SM78VR you'll just need the SmartPlug RV TV/Internet Inlet - 2 Coaxial Connector - Stainless Steel #SM58FR. This comes with two coaxial connectors but you can always pop one out and install an…

view full answer...

Answer 9

A direct replacement for your Winntec Model 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as the BTU rating is compatible and they have the same fitting sizes.

view full answer...

Answer 10

Yes, the #100019-24 pigtail can be used to connect your dual-cylinder 100 lb propane setup to the regulator on your RV. Since this hose does not have a back-check to contain a gas leak, you will need the #204120-MBS fitting that includes a…

view full answer...

Answer 11

The Winntec 6020 is an automatic changeover regulator, and the best option we have to replace it is with one from Camco, which is the following part number: - Camco Automatic Changeover 2-Stage Propane Regulator for Dual Propane Tanks #CAM59005 This…

view full answer...