How Wide Of A Frame Can The Hollywood Racks Destination E Bike Rack Clamps Fit

Question

Question:

Does the HLY66ZR work well with Soul Cuda, it has a bigger frame than the ones in the video? Is the locking clamp big enough? Thanks

asked by: Mike

0

Expert Reply:

We actually have the Hollywood Racks Destination E Bike Rack for 2 Electric Bikes # HLY66ZR in our demo area so I opened the clamp as far as I could and took some measurements. The clamp has a U shape and from the opening to roughly 3/4 of the way to the center it measures 3" wide and then slims down to 2" wide.

expert reply by: Kevin C

0

Answer 1

Vehicle suspensions are built with comfort in mind and put much less stress on a bike rack, whereas RV suspensions are a lot less sophisticated and will bounce a lot causing a lot of stress on the bike rack. Over time this stress can cause the bike…

view full answer...

Answer 2

Yes, the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes, #HLY64FR, has an anti-rattle hitch pin and hitch tightener to reduce movement of rack in hitch receiver.

view full answer...

Answer 3

The Hollywood Racks RV Rider 2 Electric Bike Platform Rack part #HLY64FR is not available with narrower wheel cradles, but using the HLY64FR would have no negative effects with narrower wheels and allow you to use the rack with all types of bikes…

view full answer...

Answer 4

The bike rack you are looking for is the Hollywood Racks RV Rider part #HLY64FR. This is an e-bike rack that is rated for use at the rear of a motorhome that has an 80 lb per bike capacity. In case either of your bikes have fat tires it can also fit…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 7

The Tow Defender #RM-4700 you found is really our best option to protect the front of your 2024 Chevrolet Trax. This screen helps to deflect any road debris back down to the ground to keep it traveling under your Trax. This particular cover is…

view full answer...

Answer 8

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 9

A cover being installed on your spare tire would not prevent the Swagman Bike Rack part #S80501 from installing. The rack would still fit and work well. You might still compare the dimensions in the picture I attached with you spare tire so that you…

view full answer...

Answer 10

You should not need an extension for the Hollywood Racks Destination E Bike Rack #HLY66ZR to fit on your 2021 Jeep Wrangler Unlimited Sport. We installed this on a 2021 2-door Wrangler which I have included the install video linked near the bottom of…

view full answer...

Answer 11

Most critical to trailer tire performance and durability are 1) proper inflation 2) observance of the tire's rated load capacity and 3) observance of the tire's speed rating. If either of these factors is off the mark then the tire will tend…

view full answer...

Answer 12

You're in luck! There's no need for a 2" hitch if you want to carry two ebikes! I really like the Thule EasyFold XT 2 E-Bike Platform Rack #TH903202 for ebikes because it makes loading and unloading ebikes easier. It works with both a…

view full answer...

How Wide Of A Frame Can The Hollywood Racks Destination E Bike Rack Clamps Fit

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching