Max Door Thickness JR Locking Camper Door Latch Can Fit

Question

Question:

Whats the max door thickness this lock will work for?

asked by: John

0

Expert Reply:

The max door thickness the JR Products part # 37210805 can fit is 1-1/2 inch.

expert reply by: Jameson C

0

Answer 1

As long as the hole in the roof of your 1988 Burro Egg Camper trailer has a rough opening of 14-1/4 inch by 14-1/4 inch then yes the Ventline Ventadome Trailer Roof Vent #V2110SP-24 would work well for you. This is a great manual vent that as long…

view full answer...

Answer 2

It sounds like you are looking for the Replacement Screen Frame with Screen for Ventline Ventadome Trailer Roof Vents #BVC0573-41, which also measures 13 1/2 x 13 1/2. Depending on the age of the screen you're replacing, #BVC0573-41 may…

view full answer...

Answer 3

I recommend the Bauer Products European Style RV Entry Door Lock #BA38AR to replace your Bargman L400. As there is not a direct bolt on replacement for the Bargman L400 you will need to fabricate a panel to cover the larger hole on your door and…

view full answer...

Answer 4

The distance between the bolt centers of the latch #37210805 is 1-3/4 inches.

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Max Door Thickness JR Locking Camper Door Latch Can Fit

Product Page this Question was Asked From

Continue Researching