Correct Replacement Motor for Kwikee Steps Using A Power Gear 903209000 Motor

Question

Question:

Hi 2005 dynaquest qwiki steps motor. Need motor with steps elbow attached. My motor elbow broke off. Original motor was part number 903209000 Thanks

asked by: Patrick F

0

Expert Reply:

The correct motor for your Kwikee steps with the Power Gear 903209000 motor is the Replacement Lippert Components 5:1 Gearbox With Motor for RV Steps # LC62FR.

expert reply by: Bryce D

0

Kwikee Electric Steps
(click to enlarge)

Answer 1

We've ran into this issue before, but unfortunately Kwikee/Lippert no longer manufactures that 151332 motor, and I'm sorry to say that they do not offer a replacement. I was unable to find anything about the 131320 part you mentioned…

view full answer...

Answer 2

Since you have the newer version "A" linkage and motor for your Kwikee double step, yes, you can replace it with the stronger motor and gearbox from Lippert that you mentioned: - Replacement Lippert Components 5:1 Gearbox With Motor…

view full answer...

Answer 3

The Item #LC62FR you referenced will not replace your #909520 motor. You need the Replacement Motor with Mounting Plate for Kwikee Electric RV Steps item #LC379608. This will allow you to replace your bad motor and not have to replace your gearbox.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Brad, thanks a bunch for going ahead and getting all those measurements in advance. Based on the measurements you've given, the TorkLift GlowStep Revolution Uprising Steps w/ Booster Step #TL52SR will work perfect for your coach. These steps…

view full answer...

Answer 6

Hey William, the E6 error on a Furrion wall thermostat indicates an Open circuit Humidity Sensor issue. Most likely the sensor is bad and needs to be replaced as this is a pretty rare error code.

view full answer...

Answer 7

We do have the correct replacement controller for the Kwikee 1800709 you have. What you need is the Replacement Control Unit #LC363989.

view full answer...

Answer 8

For your Kwikee electric RV steps the motor you need is Replacement Motor for Kwikee Electric RV Steps - 12V Item #LC379147 and the gear box is Replacement Gear Box and B Linkage for Kwikee Electric RV Steps Item #LC379161 The LC369545 is what the…

view full answer...

Answer 9

Thanks for the picture of your current gearbox and motor assembly. Based on seeing that you have the linkage "C" so the correct replacement is the part #LC42NJ.

view full answer...

Answer 10

The correct gear/linkage that you need for your Kwikee 28 Series Steps is the Lippert Components Kwikee Step Gear/Linkage with B part #LC379161 and the correct motor is the Lippert Components Kwikee Motor and Screws for New IMGL Step part #LC379147.…

view full answer...

Answer 11

The correct replacement motor for your LCI motor 366043 on your Kwikee steps is Lippert Components Kwikee Motor and Screws for New IMGL Step Item #LC379147.

view full answer...

Answer 12

The LCI part number you referenced cross references with the replacement motor part #LC379147. But since you are hearing grinding you probably need a replacement gear box which would be part #LC379160.

view full answer...

Correct Replacement Motor for Kwikee Steps Using A Power Gear 903209000 Motor

Product Page this Question was Asked From

Continue Researching